1/4

Kapazi

Waterkap Elite Mat

SKU: NÃO INFORMADO

The Waterkap Elite Mat is made for entrances that leave no room for compromise: with a 2.00 m width, 8 mm thickness, and a composition of 79% PVC and 21% polyester, its raised surface scrapes off solid dirt and absorbs moisture from footwear more effectively than 100% PVC doormats, keeping indoor floors drier even on the busiest days. The nonslip backing ensures stability on porcelain tile, ceramic, and marble without glue, staples, or tools, and the 10 m roll can be cut with a utility knife to the exact length of your space, with no waste or additional finishing required.

Suitable for condominium entrances, commercial reception areas, high-traffic corridors, and lobbies where appearance and safety matter, the Waterkap Elite is available in Black, Brown, and Graphite, designed for institutional environments that call for discretion and presence at the same time. Cleaning is straightforward: shake it out daily, vacuum periodically, and wash with water and mild soap when necessary. No complicated installation, no specialized maintenance, no compromises.

Heart: Selecione uma opção

Buy or ask questions on WhatsApp

Thickness
of 8 mm
Width
of 2.00 m
High moisture
absorption
Custom-made
to measure

Share:

Questions about the Waterkap Elite Mat?

WhatsApp | FAQ

Are you a Shopkeeper? Get free shipping to the South or Southeast on purchases over R$1,500.00

Access Kapazi Resale

Waterkap Elite Mat

Heart: Preto

Change

The Waterkap Elite Mat is made for entrances that leave no room for compromise: with a 2.00 m width, 8 mm thickness, and a composition of 79% PVC and 21% polyester, its raised surface scrapes off solid dirt and absorbs moisture from footwear more effectively than 100% PVC doormats, keeping indoor floors drier even on the busiest days. The nonslip backing ensures stability on porcelain tile, ceramic, and marble without glue, staples, or tools, and the 10 m roll can be cut with a utility knife to the exact length of your space, with no waste or additional finishing required.

Suitable for condominium entrances, commercial reception areas, high-traffic corridors, and lobbies where appearance and safety matter, the Waterkap Elite is available in Black, Brown, and Graphite, designed for institutional environments that call for discretion and presence at the same time. Cleaning is straightforward: shake it out daily, vacuum periodically, and wash with water and mild soap when necessary. No complicated installation, no specialized maintenance, no compromises.

General information

Product type	Roll mat
Thickness	8 mm
Roll width	2,00 m
Roll length	10,00 m
Usable area per roll	20.00 m²
Weight per m²	4.4 kg/m²
Surface weight	1,100 g/m²
Warranty	1 year against manufacturing defects

Performance

Surface function	Mechanical scraping of solid dirt and moisture absorption
Non-slip backing	Yes — no glue, staples, or additional fastening required
Custom cutting	Yes — can be cut with a utility knife or scissors on a flat surface
Recommended use	Indoor and covered outdoor areas, moderate traffic
Dimensional variation	Up to 2%, in accordance with INMETRO Ordinance No. 01 of 07/01/1998

Composition

Surface material	Raised polyester (21%)
Backing material	Non-slip PVC (79%)

Commercial

Available colors

Black, Gray, Brown, Beige, White, Yellow, Orange, Red, Navy Blue, Royal Blue, Moss Green, Flag Green

1	Measure the space Measure the length and width of the installation area. The roll has a fixed width of 2.00 m; plan the cut according to the dimensions of the space.
2	Cut the mat Unroll the mat onto a clean, flat surface. Use a utility knife or suitable scissors to cut it to the desired length. No additional finishing is required after cutting.
3	Position it Place the mat in the desired location with the raised surface facing upward. The non-slip PVC backing provides stability on porcelain tile, ceramic tile, marble, and similar smooth surfaces, without the need for glue or staples.
4	Adjust the position Align the edges with the space and check that the mat is flat and stable. No tools are needed for securing it.

Before installation

Check the clearance between the floor and the door. The 8 mm thickness may prevent doors with limited clearance from closing. Confirm this measurement before positioning the mat.

Storing the excess

Keep the excess roll rolled up at all times in a dry place protected from direct sunlight and excessive heat. Never store it folded, as this may cause permanent deformation of the material.

Recommended use

The mat is suitable for covered indoor and outdoor areas. Do not install it in locations exposed to direct rain or prolonged sunlight.

Routine cleaning

Regular maintenance preserves the rug’s absorbency and appearance. Follow the steps below as needed.

1

Shake

Shake the rug to loosen and remove solid particles accumulated on the surface.

2

Vacuum

Vacuum the rug periodically to remove debris lodged in the raised polyester surface.

3

Wash

When necessary, hand-wash with water and mild soap. Gently scrub with a soft-bristle brush in the direction of the fibers.

4

Dry

After washing, dry the rug laid flat in the shade. Never dry it folded or expose it to direct sunlight or heat sources.

Recommended frequency

Daily

Shake to remove solid dirt and sand

Periodically

Vacuum to remove debris from the raised surface

When necessary

Hand-wash with water and mild soap

✓ Pode usar

Water

Mild soap

Soft-bristle brush

Vacuum cleaner

✗ Não pode usar

Solvents (thinner, acetone, gasoline, diesel)

Alcohol

Bleach or chlorine bleach

Alkaline detergents

Washing machine

Exposure to direct sunlight or excessive heat during drying

Never dry the rug folded. After washing, always keep it laid flat on a level surface until completely dry to prevent deformation.

Technical data sheet

Technical information about the product in PDF.

Waterkap Elite Mat

Why choose

Designed for high-traffic entrances, the Waterkap Elite combines moisture absorption, dirt scraping, and immediate installation.

Superior moisture absorption

The 1,100 g/m2 polyester surface efficiently retains moisture, keeping indoor floors drier on rainy days.

Secure anti-slip base

The PVC base remains stable on porcelain, ceramic, and marble without glue or clamps, protecting both the floor and those who walk on it.

Custom cut

The 2.00 x 10.00 m roll can be cut with a utility knife to the exact size, without seams or additional finishing, eliminating waste.

Thickness and high density

With a thickness of 8 mm and 4.4 kg/m2, Waterkap Elite offers a greater fiber volume, high durability, and tactile comfort when stepped on.

With a PVC and polyester composition and a width of 2.00 m, Waterkap Elite combines moisture absorption, dirt scraping, and immediate tool-free installation.

High relief, 8 mm thick, and non-slip base: real protection right from the entrance.

Frequently asked questions

Are there still doubts?

Frequently asked questions

Can I use this rug in an uncovered outdoor area?

The Waterkap Elite is suitable for covered outdoor areas, such as building entrances and entryways protected from rain. Prolonged exposure to direct rain and sun can degrade the material over time. For completely uncovered environments, other product lines are more suitable.

Does it require glue or any other fixing for installation?

No, the non-slip PVC base ensures stability on porcelain, ceramic, and marble without any additional fastening. The rug can be positioned and repositioned without leaving residue on the floor. Installation is immediate and requires no tools.

How do I properly clean this rug?

For daily maintenance, simply shake the rug to remove loose particles and vacuum periodically to clean the raised areas. When necessary, hand wash with water and mild soap and dry flat in the shade on a flat surface. Avoid solvents, alcohol, bleach, alkaline detergents, and washing machines.

What is the product's warranty and how long does it last?

The product comes with a 1-year warranty against manufacturing defects, valid for moderate traffic use with proper maintenance. Its durability is enhanced by its high weight of 4.4 kg/m2 and surface weight of 1,100 g/m2, which indicate high material density. To preserve the product, avoid exposure to excessive heat, prolonged direct sunlight, and harsh chemicals.

What are the dimensions, and how do I cut the roll to size?

The roll measures 2.00 m wide by 10.00 m long, totaling 20.00 m2 of usable area. Cutting can be done with a utility knife or appropriate scissors directly on a flat surface, with no need for sewing or additional finishing. The excess should always be kept rolled, in a dry place protected from heat, never stored folded.

Buy or ask questions on WhatsApp