Waterkap Roll Mat
SKU: 191101
Entrances that receive wet shoes day after day need more than an ordinary spaghetti mat. The Waterkap Roll Carpet combines 79% PVC with 21% polyester: the PVC structure ensures durability and easy cleaning, while the polyester fibers absorb moisture more effectively than 100% vinyl mats can. The raised surface also traps sand, dirt, and dust before they reach the interior floor, reducing cleaning frequency in lobbies, reception areas, and corridors.
Sold in rolls 1.20 m wide, in lengths of 6.00 m or 18.00 m, Waterkap can be cut with a utility knife directly to the required size, with no glue, tools, or material waste. Its 6 mm thickness facilitates installation even in doors with limited clearance, and the non-slip backing keeps the mat firmly in place on porcelain tile, ceramic, and marble. Available in 12 colors, from neutral tones to vibrant palettes, to complement any project or the space’s visual identity.
Width
1.20 mMoisture
absorptionCustom cut
6 mm
thickness
Entrances that receive wet shoes day after day need more than an ordinary spaghetti mat. The Waterkap Roll Carpet combines 79% PVC with 21% polyester: the PVC structure ensures durability and easy cleaning, while the polyester fibers absorb moisture more effectively than 100% vinyl mats can. The raised surface also traps sand, dirt, and dust before they reach the interior floor, reducing cleaning frequency in lobbies, reception areas, and corridors.
Sold in rolls 1.20 m wide, in lengths of 6.00 m or 18.00 m, Waterkap can be cut with a utility knife directly to the required size, with no glue, tools, or material waste. Its 6 mm thickness facilitates installation even in doors with limited clearance, and the non-slip backing keeps the mat firmly in place on porcelain tile, ceramic, and marble. Available in 12 colors, from neutral tones to vibrant palettes, to complement any project or the space’s visual identity.
General data
Performance
Composition
Commercial
|
1
|
Measure the area
Measure the exact length of the area to be covered. The roll width is fixed at 1.20 m; the length can be cut to the required measurement.
|
|
2
|
Cut the mat
Unroll it on a flat surface and cut it to the desired length with a utility knife or suitable scissors. No sewing or additional finishing is required after cutting.
|
|
3
|
Position the mat
Place the mat with the base facing the floor. The non-slip base ensures stability on porcelain tile, ceramic, and marble without glue, staples, or fastening tools.
|
Routine cleaning
The excess roll must always be kept rolled up in a dry place, protected from direct sunlight and excessive heat.
Frequently asked questions