Bus Laminate Flooring
SKU: NÃO INFORMADO
Designed for environments that do not forgive failure, the Kapazi Bus Laminated Flooring is a 100% flexible PVC roll covering, 2 mm thick, with a standard bus embossed texture that ensures real traction even on wet, oily, or residue-covered surfaces. Approved with a zero burn rate in accordance with ISO 3795, the material is self-extinguishing and does not spread flames, meeting safety requirements for fleets, laboratories, industrial kitchens, and any space subject to fire safety regulations. Available in gray and black, in rolls of up to 20 m², it can be cut with a utility knife directly on site and secured with two-component adhesive, without specialized tools.
Anyone concerned that PVC flooring might scratch or deform under intensive use will find a straightforward answer here: the high-quality formulation withstands continuous wear without losing flexibility, maintaining its integrity in ramps, gyms, warehouses, and garages over time. The surface does not absorb liquids, making routine cleaning simple with mild soap and water. The material also acts as an electrical and thermal insulator, an added benefit for technical environments. At the end of its service life, it is 100% recyclable.
Thickness
of 2 mm
Roll up to
2 m wide
ISO 3795
self-extinguishing
Easy
to clean
Designed for environments that do not forgive failure, the Kapazi Bus Laminated Flooring is a 100% flexible PVC roll covering, 2 mm thick, with a standard bus embossed texture that ensures real traction even on wet, oily, or residue-covered surfaces. Approved with a zero burn rate in accordance with ISO 3795, the material is self-extinguishing and does not spread flames, meeting safety requirements for fleets, laboratories, industrial kitchens, and any space subject to fire safety regulations. Available in gray and black, in rolls of up to 20 m², it can be cut with a utility knife directly on site and secured with two-component adhesive, without specialized tools.
Anyone concerned that PVC flooring might scratch or deform under intensive use will find a straightforward answer here: the high-quality formulation withstands continuous wear without losing flexibility, maintaining its integrity in ramps, gyms, warehouses, and garages over time. The surface does not absorb liquids, making routine cleaning simple with mild soap and water. The material also acts as an electrical and thermal insulator, an added benefit for technical environments. At the end of its service life, it is 100% recyclable.
General data
Performance
Composition
Sustainability
|
1
|
Prepare the subfloor
Make sure the subfloor is clean, dry, level, and free of dust, grease, and residue before starting the installation.
|
|
2
|
Cut the flooring to the required size
Measure the area and cut the roll on-site using a utility knife or suitable scissors. No specialized tools are required.
|
|
3
|
Prepare and apply the two-component adhesive
Mix the two-component adhesive with the catalyst according to the adhesive instructions. After mixing, apply it immediately to the subfloor. Each 6 kg container covers 7 to 8 m².
|
|
4
|
Position the flooring
Place the flooring over the applied adhesive, aligning it correctly in the desired position.
|
|
5
|
Secure the flooring and remove air bubbles
Press the flooring firmly from the center toward the edges to ensure even adhesion and eliminate air bubbles.
|
Routine cleaning
The PVC surface does not absorb liquids, which makes everyday cleaning and hygiene maintenance easier.
Why choose Bus
Frequently asked questions
