Coin Laminate Flooring
SKU: NÃO INFORMADO
On ramps, industrial corridors, and any surface that demands real traction, Kapazi Coin Pattern Laminate Flooring delivers safety where it matters most. The raised circular relief characteristic of the coin pattern increases footwear traction even in wet or oily conditions, preventing falls without compromising its neutral aesthetic. Made of 2 mm flexible PVC, the material combines thermal and electrical insulation with a surface that does not absorb liquids, dry out, or succumb to the continuous wear of heavy traffic.
Approved under ISO 3795 with a zero burn rate, the product is self-extinguishing and meets safety requirements in industrial, healthcare, and transportation environments. Available in rolls of up to 20 m² and in two neutral shades, Gray and Black, it adapts equally well to gyms, garages, laboratories, covered decks, and bus floors. Installation is straightforward: cut it to the exact size of the area with a utility knife and secure it to the subfloor with two-component adhesive, without specialized tools. The result is a firm, hygienic floor designed to last.
Easy
installationThickness
of 2 mmAntislip
and safeTailored
cut
On ramps, industrial corridors, and any surface that demands real traction, Kapazi Coin Pattern Laminate Flooring delivers safety where it matters most. The raised circular relief characteristic of the coin pattern increases footwear traction even in wet or oily conditions, preventing falls without compromising its neutral aesthetic. Made of 2 mm flexible PVC, the material combines thermal and electrical insulation with a surface that does not absorb liquids, dry out, or succumb to the continuous wear of heavy traffic.
Approved under ISO 3795 with a zero burn rate, the product is self-extinguishing and meets safety requirements in industrial, healthcare, and transportation environments. Available in rolls of up to 20 m² and in two neutral shades, Gray and Black, it adapts equally well to gyms, garages, laboratories, covered decks, and bus floors. Installation is straightforward: cut it to the exact size of the area with a utility knife and secure it to the subfloor with two-component adhesive, without specialized tools. The result is a firm, hygienic floor designed to last.
General data
Performance
Commercial
Composition
Sustainability
|
1
|
Prepare the subfloor
Make sure the subfloor is clean, dry, level, and free of dust, grease, or residues that could compromise the adhesive’s bond.
|
|
2
|
Cut the roll to size
Measure the area to be covered and cut the flooring with a utility knife or suitable scissors. The cut can be made directly on site without specialized tools.
|
|
3
|
Apply the two-component adhesive
Use a two-component contact adhesive (with catalyst). Apply the adhesive evenly over the subfloor and, if necessary, to the underside of the flooring as well. Follow the drying time specified by the adhesive manufacturer.
|
|
4
|
Position and secure the roll
Wait until the adhesive reaches its contact stage, then position the flooring on the surface. Press firmly from the center toward the edges to ensure uniform adhesion and eliminate air bubbles.
|
Routine cleaning
The PVC surface does not absorb liquids, making it easier to clean and maintain hygiene even in high-traffic environments.
Recommended frequency
When the material is not installed, dry it on a flat surface before storing it to prevent deformation.
Frequently asked questions